You are here:Home/Plastering/Plastering

>>Shop Now<<

Portland cement type 1 mortar with high quality grinding stones.
this makes it easy to use in plastering applications. (additional sanding required) and general concrete work.
sand and stone must be mixed in a suitable ratio.
meets specified criteria in the cement industry standard tis 80-2550

HOW TO USE CEMENT COMPOUND TPI 199

PUTTY

  • Clean the surface of the wall to be plastered clean. Watering the wall
  •  Mix TPI 199 plaster 1 bag per 8 to 9 sand buckets (ratio 1: 2.25 by volume)
  •  Add clean water in the right ingredients. Leave it for a moment and mix the mortar well.

GENERAL CONCRETE WORK

  • Mix tpi 199 with 1 coarse sand and 1: 2: 4 volume of coarse sand and stone (if hand mixed, mix tpi 199 with coarse sand prior to first order and mix the stone in order until mixture well)
  • Add clean water to the mix.
  • Ingredients well.

WORK

  • Mix tpi 199 1 bag per coarse sand 5-7 buckets (ratio 1: 1.75 by volume)
  • Add clean water to the right ingredients for a moment or two. Then mix the mortar together.
  • Apply to mon brick or brick block in accordance with general procedures.)

RFQ

Form by ChronoForms - ChronoEngine.com

>>Shop Now<<

Finished plaster used for wall decoration that requires exquisite workmanship, the work will be smooth and fine. Suitable for mon brick wall. Or concrete block Both indoor and outdoor use. TIS 1776-2542 (Plate)

INFROMATION

Compound material between TPI Portland cement Crushed stone through the drying process and size up to 2 times and high quality chemicals from abroad. It has special properties for waterproofing. And cracking sesame Wall not slip And do not shrink after plastering. Suitable for a variety of applications. Just mix the water to the right proportion, it can be used immediately.

SUGGESTION

  • After mixing water It should be used within 2 h 30 minutes (1 bag of cement = 50 kg of water 12 liters)
  • It should be stored in a dry, damp and covered place.

WORK PROCEDURES

  • Clean and pour the water to the wall to be plastered to moderate.
  • Mix TPI (M100) plaster with 3: 1 volume of clean water.
  • Mix well.
  • Apply to the general putty. It can also be used in conjunction with a Mortar Machine.

TECHNICAL INFORMATION

  • Mixing 1 bag of water 12 liters of water
  • Weight 50 k.g.


Thickness (m.m.)/ Mortar 1 plastered canvas (sq.m.)/ Usage per square meter (k.g.) 10/ 2.88/ 17
Thickness (m.m.) Mortar 1 plastered canvas (sq.m.) Usage per square meter (k.g.) 15/ 2.16/ 23

RFQ

Form by ChronoForms - ChronoEngine.com

>>Shop Now<<

Finished fine morter used for plastering, such as concrete walls, both inside and outside the building, is certified according to Thai Industrial Standard Institute 1776-2542 (Putty Cement).

INFORMATION

Compound material between TPI Portland cement Crushed stone through the drying process and size up to 2 times and high quality chemicals from abroad. Special properties in water. Extra high adhesion strength. The plaster texture is easy to slip plaster, reduce the problem of cracking. And cracking sesame Wall not slip And do not shrink after plastering. Suitable for a variety of applications. Just mix the water to the right proportion, it can be used immediately.

SUGGESTION

  • If you want to plaster at a thickness of more than 1 cm should be put one layer. Then leave to damp, then plastered to the next step.
  • After mixing water It should be used within 2 hours 30 minutes (1 bag of cement = 50 kg of water 11 liters)
  • It should be stored in a dry, damp and covered place.

WORK PROCEDURES

  • Clean and pour the water to the wall to be plastered to moderate.
  • Mix TPI (M100C) concrete with 3.5: 1 volume of clean water.
  • Mix well.
  • Apply mortar mixed on concrete surface in accordance with the general putty. Without extracting the skin first It can also be used in conjunction with a Mortar Machine.

TECHNICAL INFORMATION

  • Mixing 1 bag of water 11 liters
  • Weight 50 k.g.

Thickness (m.m.)/ Mortar 1 plastered canvas (sq.m.)/ Usage per square meter (k.g.) 5/ 5.75/ 8.7
Thickness (m.m.)/ Mortar 1 plastered canvas (sq.m.)/ Usage per square meter (k.g.) 10/ 2.89/ 17.3

RFQ

Form by ChronoForms - ChronoEngine.com

>>Shop Now<<

Cement is mixed with inert materials such as limestone and other types of Portland cement type 1 produced by the quality of cement that is correct. Meets the criteria Specified in the cement industry standard TIS 80-2550 suitable for plastering work and Concrete piling work is not very high compression.

RFQ

Form by ChronoForms - ChronoEngine.com