Banner_Grout
You are here:Home/Product/Tile Grout/TPI M551 Super Plus

TPI M551 Super Plus

>>Shop Now<<

Ready-made mortar applied for grout tile and small groove. High quality with special ingredients is high performance that grout capable to flows into the groove well. Accelerated accelerator set up Adhesion additives provide high adhesion, reduce cracking (anti-crack), hydrotectant, prevent adhesion of dirt. Easy to clean Reduce water absorption. Prevents mold and moss. When to use the water to mix. Apply immediately.

SCOPE OF USE

  • Used for grout tiles 0.5 - 3.0 mm. Suitable for granite tile, marble, marble for both floor and wall. Inside and outside

RAW MATERIAL

  • TPI Portland Cement Type 1 Cement according to ASTM C-150 TIS 15-2555
  • Fine Crushed Limestone through the drying and sizing process.
  • High quality chemicals from abroad Features extra flow and acceleration, extra water holding, extra high adhesion. And add a waterproofing feature.

HOW TO PREPARE THE SKIN AND USE

    1. Surface preparation: Clean the surface to be grout. By removing dirt, stains, oil, dust, and anything that affects adhesion.
    2. Mixing: mix cement mortar with mortar ratio of 1 kg per 0.3 liters of water, then mix the mixture into homogeneous. Do not leave the lumps that are not into the water.
    3. Grout: make grout according to the general method.
      Note: After mixing the water. Should be used within 1 hour.

QUANTITY OF USAGE

Tile size/ The grout area has 1 kg of mortar.
Tiles 24 ""x 24""/ 8-20 square meters
Tiles 12 ""x 12""/ 6-15 square meters
Tiles 8 ""x 8"" / 4-10 square meters
Tiles 4 ""x 4""/ 3-8 square meters

More in this category: «M550 grout"

RFQ

Form by ChronoForms - ChronoEngine.com