Print this page

TPI M600 Multil Purpose Repair Mortar

Multi – Purpose Repair Mortar

Product characteristics

TPI M600 is suitable for repairing the small areas such as cracking area, wall scaling, breaking/ drilling marks, leakages, ceramic tile repairing etc.

>>Shop Now<<

Raw Materials

  • TPI Portland cement type l according to ASTM c-150 and TIS 15 part 1-2555
  • Fine limestone thoroughly dried and classified
  • High quality chemical additives for enhancing extra high adhesive strength.

Workability, and for reducing cracking and shrinkage.

How to use

Repair wall and floor split up or cracking

Plug and repair the break or drill

Laying ceramic tile repairing

  • Extract the surface to space about 1-1.5 cm and depth of taest 1 cm
  • Clean the repair area moisten with water.
  • Mix TPI M600 with clean water in appropriate ratio.
  • Apply the mortar on the cracking or split up and then smooth the surface and leave to dry.
  • Clean the repair area and moisten with water.
  • Mix TPI M600 with clean water in appropriate ratio.
  • Apply the mortar on the break or drill and leave to dry.
  • Extract the original tiles needs repair out.
  • Clean the repair area and moisten with water.
  • Mix TPI M600 with clean water in appropriate ratio.
  • Spread it on the tiles for 1-2 mm. thick. Then apply to the area to be repaired. Adjust level and parallels with the original tiles.

Remark: After mixed with should apply within 1 hour.  ( 1 bag (2 kg) per 0.35 – 0.40 liters of water) After opening the bag, should be use all the contents. If mortar are remains in bag, please seal tightly and keep in the dry place and not damp.

Suitable For Crack Or Split Up Repairing Or Plug The Break Or Drill.

RFQ

Form by ChronoForms - ChronoEngine.com