Banner_Mortar
You are here:Home/Mortar/Dry Concrete/dry concrete

>>Shop Now<<

This mortar product is complete mix and only needs water of recommended ratio to have a very desirable mortar mixture, it can be used without any other additives and the concrete work will have compressive strength of minimum 180 ksc.

RFQ

Form by ChronoForms - ChronoEngine.com

>>Shop Now<<

TPI M401S is suitable for concrete works in coastal or marine area environments where high sulfate and chloride salts could contact concrete. After mixing with recommended ratio with water, it can be used without any other additives and the concrete work will have compressive strength of minimum 180 KSC (Cylinder) This concrete will withstand sulfate and chloride attacks.

RFQ

Form by ChronoForms - ChronoEngine.com

>>Shop Now<<

This mortar product is suitable for concrete work after mixing with recommended ratio with water, it can be used without any other additives and the concrete work will have compressive strength of minimum 240 KSC.

RFQ

Form by ChronoForms - ChronoEngine.com

>>Shop Now<<

TPI M402S is suitable for concrete work in coastal or marine area environments where high sulfate and chloride salts could contact concrete. After mixing with recommended ratio with water. it can be used without any other additives and the concrete work will have compressive strength of minimum 240 KSC (Cylinder). This concrete will withstand sulfate and chloride attacks.

RFQ

Form by ChronoForms - ChronoEngine.com

Dry Lean Concrete 280 KSC Cylinder (Or 320 KSC Cube)

>>Shop Now<<

Product Characteristic

M403  ready mixed mortar is suitable for concrete work.

After mixing with recommended ratio with water, it can be used without addition of any other additives and  the concrete work will have compressive strength of minimum 280 KSC.

Instruction for mortar preparation

  1. Mix 1 bag (50 kg) of TPI M403 with 7-8 liters of clean water.
  2. Mix well until the mixture is homogeneous, and apply according to the common practices for concrete work.
  3. In case a special concrete mix with desired properties is required by addition of admixtures, then user can add the additives according to the ratio and procedures given by the manufacturer of the additive.

       Application

Suitable for common small concrete works such as ground leveling, post – lintel, pathway,  car  park, reinforced concrete construction etc.

Usage Quantities

Mixing ratio per bag

Amount  per cubic meter

TPI M403 1 bag (50 kg)

TPI M403   45 bag (2,250 kg)

Water 7-8 liters

Water 315 – 360 liters

 

Usage Quantities : In case of mixing with stone size ½” or ¾’

Mixing ratio per bag

Amount  per cubic meter

TPI M403 1 bag (50 kg)

TPI M403   30 bag (1,500 kg)

Stone size ½” or ¾” 30 kg (3 buckets)

Stone size ½” or ¾” 900 kg (90 buckets)

Water 7-8 liters

Water 210-240 liters

Suitable for Road construction and Reinforced concrete  work at compressive strength 280 KSC cylinder (Or 320 KSC Cube)

RFQ

Form by ChronoForms - ChronoEngine.com

Dry Concrete 280 KSC Cylinder (Or 320 KSC Cube)

>>Shop Now<<

Product Characteristic

TPI M403S is suitable for concrete works in coastal or marine area environments where high sulfate and chloride salts could contact concrete.  After mixing  with recommended ratio with water.  It   can be  used without any other additives and the  concrete work will have compressive strength of minimum 280 KSC (Cylinder)  This concrete will withstand sulfate and chloride attacks.

Instruction for mortar preparation

  • It is suitable for common concrete work such as ground leveling, post – lintel, road construction, car park and reinforced concrete with sulfate and chloride resistance.
  • In case of large volume of lean concrete works are involved, addition of stone ½” or ¾’ could be included in pouring mixture.
  • Mix 1 bag (50 kg) of TPI M403S with 7-8 liters of clean water, then apply according to the common practices for concrete work.
  • In case a special concrete mix with desired properties is required of admixtures, then user can add the additives according to the ratio and procedures given by the manufacturer of the additive.
  • In case of large leveling work, add clean stones size ½” or ¾” grade (conforms to ASTM C33) with mixing ratio 30 kg of stone per 1 bag (50 kg) of mortar.

Mixing ratio per bag

Amount per cubic meter

TPI M403S 1 bag (50 kg)

TPI M403S  45 bag (2,250 kg)

Water 7-8 liters

Water 315-360 liters

Mixing ratio per bag

Amount per cubic meter

TPI M403S 1 bag (50 kg)

TPI M403S 30 bag (1,500 kg)

Stone size ½ or ¾’ 30 kg (3 buckets)

Stone size ½ or ¾’ 900 kg (90 buckets)

Water 7-8 liters

Water 210-240 liters

Suitable for Road construction and Reinforced concrete at Coastal area at compressive strength 280 KSC cylinder (Or 320 KSC Cube)

RFQ

Form by ChronoForms - ChronoEngine.com

>>Shop Now<<

M404 ready mixed mortar is suitable for concrete work. After mixing with recommended ratio with water, it can be used without addition of any other additives and the concrete work will have compressive strength of minimum 350 KSC.

RFQ

Form by ChronoForms - ChronoEngine.com

Dry  Concrete 350 KSC Cylinder (Or 400 KSC Cube)

>>Shop Now<<

Product Characteristic

TPI M404S is suitable for concrete works in coastal or marine area environments where high sulfate and chloride salts could contact  concrete. After mixing with recommended ratio with water, it  can be used without any other additives and the concrete work will have compressive strength of minimum 350 KSC (Cylinder). This concrete will withstand sulfate and chloride attacks.

Instruction for mortar preparation

  • It is suitable for common concrete work such as ground leveling, post – lintel, road construction, car park and reinforced concrete with sulfate and chloride resistance.
  • In case of large volume of lean concrete works are involved, addition of stone size ½” ¾’ could be included in pouring mixture.
  • Mix 1 bag (50 kg) of TPI M403S with 7-8 liters of clean water, then apply according to the common practices for concrete work.
  • In case a special concrete mix with desired properties is required by addition of admixtures, then user can add the additives according to the ratio and procedures given by the manufacturer of the additive.
  • In case of large leveling work, add clean stones size ½’ or ¾’ grade (conforms to ASTM C33 ) with mixing ratio 30 kg of stone per 1 bag (50 kg) of mortar.

Mixing ratio per bag

Amount per cubic meter

TPI M404S 1 bag (50 kg)

TPI M404S 45 bag (2,250 kg)

Water 7-8 liters

Water 315 – 360 liters

Mixing ratio per bag

Amount per cubic meter

TPI M404S 1 bag (50 kg)

TPI M404S 30 bag (1,500 kg)

Stone size ½’ or ¾’ 30kg (3  buckets)

Stone size ½’ or ¾’ 900 kg (90  buckets)

Water 7-8 liters

Water 210 – 240 liters

RFQ

Form by ChronoForms - ChronoEngine.com