Ready-to-use mortar Used for internal wall and wall work. Externally above ground level buildings such as mon brick walls or concrete blocks. (But not including aerobics blocks) that enhance adhesion. Make the wall more convenient. Both are still in compliance with TIS 598-2547, dry mortar (type 50)
INFORMATION
- Compound material between TPI Portland cement Crushed stone through the drying process and size up to 2 times and high quality chemicals from abroad. Strengthening adhesion strength. Walls stick together well. More strength Suitable for a variety of applications. Just mix the water to the right proportion, it can be used immediately.
SUGGESTION
- After mixing water Should be used within 2 hours 30 minutes.
- It should be stored in a dry, damp and covered place.
WORK PROCEDURES
- Clean and pour the water to the wall to be plastered to moderate.
- Mix TPI (M300) lime with 4.5: 1 volume of clean water.
- Mix well.
- Apply to the general procedure. It can also be used in conjunction with a Mortar Machine.
TECHNICAL INFORMATION
- Mix 1 bag of water 9 liters
- Weight 50 kg.
Material used/ 1 bag of cement mortar area (sq.m) /Usage per square meter (kg)
Brick Masonry (6x14x3 cm.)/ 1.15/ 43.48
Brick Holes (6.5x16x4 cm.)/ 1.25/ 40.00
Concrete Block (39x19x7 cm.)/ 2.00/ 25.00
A ready – dry mixed mortar suitable for masonry work both indoor and outdoor application such as bricklaying of brick or concrete block (but not including lightweight block) It is providing a high adhesive strength, good workability. It conforms to TIS 598 – 2547 Thai industrial standard for (Masonry ready dry mixed mortar (type50))
Precast concrete especially developed for lightweight concrete blocks. High adhesion to slippery, easy to work quickly. Make the walls beautiful and strong.
INFORMATION
- Compound material between TPI Portland cement Crushed stone through the drying process and size up to 2 times and high quality chemicals from abroad. Strengthening adhesion strength. Walls stick together well. More strength Suitable for a variety of applications. Just mix the water to the right proportion, it can be used immediately.
SUGGESTION
- Lightweight blockers can be used in small quantities.
WORK PROCEDURES
- Mix TPI M310 with 2.6: 1 volume of clean water.
- Mix well.
- Applied to the lightweight block building process. Using a special trowel for lightweight blocks. (Do not use the leaves of the pho in the block building)
TECHNICAL INFORMATION
- Weight of 1 bag contains 50 kg.
Material used/ Thickness (mm)/ 1 bag of cement mortar area (cm)/ Usage per square meter (kg)
Lightweight block mortar/ Only 3-5 floors/ 7.5x20x60/ 30