>>Shop Now<<

Ready-mixed plaster for general plastering Suitable for use with brick wall brick mon Or concrete block Available both indoor and outdoor. Certified according to TIS 1776-2542 (General Putty)

INFORMATION

Compound material between TPI Portland cement Crushed stone through the drying process and size up to 2 times and high quality chemicals from abroad. It has special properties for waterproofing. And cracking sesame Wall not slip And do not shrink after plastering. Suitable for a variety of applications. Just mix the water to the right proportion, it can be used immediately.

SUGGESTION

• After mixing water It should be used within 2 hours 30 minutes (1 bag of cement = 50 kg of water 11 liters)
• It should be stored in a dry, damp and covered place.

WORK PROCEDURES

- Clean and pour the water to the wall to be plastered to moderate.
- Mix TPI (M200) concrete with 3.5: 1 volume of clean water.
- Mix well.
- Apply to the general putty. It can also be used in conjunction with a Mortar Machine.

TECHNICAL INFORMATION

- Mixing 1 bag of water 11 liters
- Weight 50 k.g.

Thickness (m.m.)/ Mortar 1 plastered canvas (sq.m.)/ Usage per square meter (k.g.) 10/2.88/ 17
Thickness (m.m.)/ Mortar 1 plastered canvas (sq.m.)/ Usage per square meter (k.g.) 15/ 2.16/ 23

>>Shop Now<<

A ready mixed plastering mortar suitable for a general plastering works on and concrete block for both indoor walls application it conforms to TIS 1776-2542. Thai industrial standard.

>>Shop Now<<

Ready-made mortar for some plastering Work with a trowel polishing, it is applied as Finishing Coat, making the skin smooth. Covering plaster walls with sand, crack, sesame and uneven surface. Can be made of bare walls. Or repaint

SCOPE OF USE

Can be applied on concrete walls. Or plaster walls, such as the wall plastered with M100, M100C, M200 or M210, etc. can also be used wall posts. To cover cracks or crevices.

RAW MATERAIL

• TPI Portland Type 1 Cement according to ASTM C-150 and TIS 15-2547
• Chemical additives such as additive properties of water. Additives, adhesives, etc.
• Fine limestone crushed
  

  HOW TO USE

1. Wall preparation

- In cases where the walls are smooth, Super Skim Coat TPI can be plastered without the need for plastering.
- If the wall is plastered with very rough surface, such as concrete wall, use M100C pre-plastering. Try to smooth the surface evenly. And wait for the plaster to dry completely. So it is plastered with Super Skim Coat TPI.

2. Using
- Mix Super Skim Coat TPI plaster with water using 1 liter bag (20 kg) per 8 liters of water. Without resting the plaster to the water.
- Super Skim Coat TPI plaster with polished steel By thin-walled plastered up the floor one after the plaster. Apply in the same way until the desired thickness (about 1-2 mm).
- Before painting, fine sandpaper can be used to smooth the surface.

Thickness of plaster/ The plastered area is 20 kg./ The amount of cement per 1 sq.m.: 1-2 MM./ 10SQ.M./ 2 KG.

Super skim coat Hardening

>>Shop Now<<

How to use

Surface Preparation

• Clean the surface until the free from dust, oil Chemical and other contaminates to prevent the bonding strength of the adhesion.
• Remove all weak materials from the surface until the surface layer is strong enough.
• Treat the surface with water and let to semi-dry surface before applying with mortar.

Application

• Mix 1 bag (20 kg) of   TPI M651 with 4 liters of clean water until mixture is homogenous.
• Apply on the cleaned surfaced with thin layer of Super Skim Coat hardening M651 and the required thickness is at least 1-3 mm. Or it can repair with plastering the cracks and to attend the roughness in order to make a smooth and more stronger surface.
• 4 hours after plastering, the plastered area is dried and it can be used.
• For the beautiful surface which is easy to clean, use with TPI Super Armour Nano Paint

 NP301 Flooring  (Top Coat – water based formula) which has clear and color products.

Usage Quantities : for package 20 kg

Suitable for Repair with thin Plastering on Crack, Hold or Gap.